Tesamorelin Vial (source-of-truth packshot)

Tesamorelin Next-Gen Dual-Chamber Pen

Vial
423.00 AED
Skip to product information
Tesamorelin Vial (source-of-truth packshot)
  • Tesamorelin Vial (source-of-truth packshot)

Dosage instructions

10 mg per pen10 mg per vial
Dose 1 or 2 mg daily in the evening, 1-2 hours before last meal
Pens required 3 or 6 pens per month to complete course
Units 5 or 10 units daily 1 or 2 mg per injection
Vials required 3 or 6 vials per month to complete course
Reconstitution 2 ml bacteriostatic water 0.2 or 0.4 ml per injection
Frequency and course duration Daily During 26 weeks (≈6 months). 1-month break after each cycle.
Box content: includes 1 dual-chamber pen (ready-to-use, factory-loaded).
Box content: 1 vial Tesamorelin 10 mg + 1 vial Bacteriostatic Water 3ml

Designed for advanced laboratory research environments only

Visuals may show mixed and unmixed pen states to demonstrate our patented dual-chamber technology.

RUO Pen MUSCLE GROWTH SKIN ANTI AGING WEIGHT LOSS

Tesamorelin Next-Gen Dual-Chamber Pen

GH signaling · Visceral fat · Belly fat · Body composition · Anti-aging

Co-developed with 600+ researchers

  • French Lab Tested 🇫🇷
  • 99%+ Purity Target
  • HPLC & HRMMS Verified
  • 90,000+ packages delivered worldwide
  • QR Batch Reports
  • Secure Checkout
  • Fast International Shipping (3-5 days)
  • 90,000+ packages delivered worldwide

≥99% Purity | HPLC Tested | Batch Verified. Ships from UAE. Twist and mix dual-chamber pen for laboratory research use only.

Select Variant

Certificate of Analysis available for every batch.

Secure checkout • Fast UAE dispatch • Research Use Only

Secure checkout

Fast UAE dispatch

Tesamorelin Next-Gen Dual-Chamber Pen

About the Product

About Tesamorelin

Tesamorelin is a premium growth hormone releasing peptide designed for visceral fat reduction, metabolic optimization and body-composition improvement.

It targets the GHRH pathway, stimulating the body's natural growth hormone signaling to support the biological mechanisms behind fat metabolism, leaner body composition, recovery, skin quality and anti-aging optimization.

Tesamorelin is especially known for its strong positioning around abdominal fat, visceral fat, metabolic health and physique refinement, making it one of the most premium peptides for advanced fat-loss and longevity protocols.

Unlike basic GLP-1 approaches focused mainly on appetite, Tesamorelin works through the growth hormone axis, helping support a deeper metabolic environment linked to fat mobilization, recovery and structural body improvement.

Key Benefits

  • Premium for abdominal and visceral fat loss
  • Supports natural growth hormone signaling
  • Helps improve body composition pathways
  • Supports fat metabolism and metabolic optimization
  • Targets visceral fat related pathways
  • Supports leaner, tighter physique development
  • Helps improve recovery and physical resilience
  • Supports skin quality, collagen and anti-aging pathways
  • Supports sleep, repair and overnight regeneration signals
  • Ideal for fat-loss, anti-aging and body optimization protocols

Handling & Preparation

Peptik Dual-Chamber Pen Technology is engineered to simplify preparation while helping preserve peak compound quality.

Unlike traditional pre-mixed systems, the peptide and diluent remain separated until preparation — reducing premature exposure and supporting superior stability before use.

The result: faster handling, cleaner preparation and a more premium research experience.

Key Benefits

  • Twist. Mix. Prepare.
  • Freshly mixed only when needed
  • Reduced premature exposure
  • Designed for peak compound stability
  • Less handling, more consistency
  • Next-generation dual-chamber precision

Dual-Chamber Pen Preparation

  1. Attach a sterile pen needle
    Securely attach a compatible sterile pen needle before preparation.
  2. Twist to activate mixing
    Rotate the dual-chamber mechanism to release the diluent into the peptide chamber.
  3. Allow complete mixing
    Let the compound fully dissolve. Gently rotate the pen if needed. Do not shake vigorously.
  4. Select the required measurement
    Use the precision dial to select the desired unit setting.
  5. Unit calibration
    1 unit = 0.2 mg
    This allows controlled and consistent measurement during preparation.
  6. Ready for controlled research use
    Once fully mixed and calibrated, the pen is ready for controlled research preparation according to the intended protocol.

For controlled research environments only. Not intended for human, therapeutic, diagnostic, or veterinary use.

Handling & Preparation

Traditional vial preparation for researchers who prefer full control, purity and cost-efficient flexibility.

Peptik Vial Format is designed for clean, controlled preparation using lyophilized peptide and bacteriostatic water. This classic research format offers a simple, precise and cost-efficient approach while maintaining the same purity and compound quality.

The result: maximum control, traditional preparation and better value per vial.

Key Benefits

  • Classic research preparation
  • Same purity and compound quality
  • Cost-efficient by design
  • Full control over reconstitution
  • Simple and familiar vial format
  • Ideal for experienced researchers
  • Flexible preparation according to protocol

Vial Preparation

  1. Use sterile preparation tools
    Use a sterile syringe and appropriate laboratory handling techniques before preparation.
  2. Add bacteriostatic water
    Slowly add the required amount of bacteriostatic water along the inner wall of the vial containing the lyophilized peptide.
  3. Allow complete dissolution
    Let the peptide dissolve fully. Gently swirl the vial if needed. Do not shake vigorously.
  4. Prepare according to protocol
    Once fully dissolved, the solution is ready for controlled research preparation according to the intended protocol.
  5. Store after preparation
    Keep the reconstituted vial refrigerated at 2–8°C and use within the recommended post-mixing timeframe.
  6. Protect compound integrity
    Keep away from excessive heat, direct sunlight and repeated temperature changes.

For controlled research environments only. Not intended for human, therapeutic, diagnostic, or veterinary use.

Storage Guidelines

To maintain product integrity, proper storage conditions are recommended throughout handling and use.

Unreconstituted (lyophilized) peptide

  • Store at 2–8°C for short-term use
  • For extended storage, keep at -20°C or below
  • Protect from direct light and moisture

Reconstituted solution

  • Store at 2–8°C and use within a limited timeframe based on laboratory protocols
  • For longer-term storage, aliquoting and freezing at -20°C is recommended
  • Avoid repeated freeze-thaw cycles, as this may affect peptide stability

General stability notes

  • Stability may vary depending on solvent choice and experimental conditions
  • Use sterile handling techniques to minimize contamination
  • Always follow internal laboratory guidelines for storage and handling

Use within 5 weeks after mixing.

This product is supplied for research purposes only and should be handled by qualified personnel in appropriate laboratory settings.

Shipping

Worldwide delivery in 3–5 days. Fast, secure, and reliable.

Peptik orders are prepared with secure handling and fast logistics for international customers.

  • International shipping within 3–5 days
  • Secure checkout and protected payment
  • Carefully handled dispatch
  • Batch documentation available for every order
  • Delivery timing and customs requirements may vary by destination

Common Questions

Answers to common questions about PEPTIK products, regulatory positioning, and laboratory use.

View full FAQ
What does RUO mean?

RUO stands for "Research Use Only." Products labeled as RUO are intended strictly for laboratory research and analytical applications. They are not approved for human consumption, therapeutic use, diagnostic procedures, or clinical implementation.

Is the product tested for purity?

HPLC Verified ≥99% Purity. Each production batch undergoes High Performance Liquid Chromatography (HPLC) purity testing, mass spectrometry peptide identity verification and full batch traceability documentation. Certificate of Analysis available for every lot.

How should this product be stored?

Store at 2-8°C. Avoid repeated freeze-thaw cycles and exposure to excessive heat or direct light. Use within 5 weeks after mixing.

How is the lyophilized peptide reconstituted?

Using a sterile syringe, add 2 ml of bacteriostatic water slowly along the inner wall of the vial containing the lyophilized peptide. Allow the solution to dissolve completely. Gently swirl the vial if necessary. Avoid vigorous shaking.

Does the pen need reconstitution?

The peptide is supplied in a pre-filled dual-chamber pen as a ready-to-use solution, eliminating the need for reconstitution or additional preparation steps. Protect from contamination during use.

Where does this product ship from?

Ships from UAE warehouse. International delivery typically 3-5 business days. Delivery timing and customs requirements vary by destination.

Is a certificate of analysis available?

Yes. Certificate of Analysis (COA) is available for every batch, documenting HPLC purity testing, mass spectrometry identity verification and full batch traceability. Available upon request to qualified research entities.

How are batches verified?

Every production batch undergoes High Performance Liquid Chromatography (HPLC) purity testing, mass spectrometry peptide identity verification, and is logged with full batch traceability documentation. Quality control is performed in France.

Are these products distributed internationally?

PEPTIK products are supplied to qualified research entities in jurisdictions where distribution complies with applicable local regulations. Availability may vary by region.

Can these products be used for medical purposes?

No. All products are supplied strictly for laboratory research and analytical purposes. They are not intended for medical, therapeutic, diagnostic, or clinical use under any circumstances.

Frequently Asked Questions

Answers to common questions about PEPTIK products, regulatory positioning, and laboratory use.

View full FAQ

RUO stands for “Research Use Only.” Products labeled as RUO are intended strictly for laboratory research and analytical applications. They are not approved for human consumption, therapeutic use, diagnostic procedures, or clinical implementation.

Products are manufactured according to defined quality standards and may be accompanied by relevant analytical documentation where applicable. Testing parameters and specifications depend on the product type and batch. Documentation may be provided to qualified entities upon request.

PEPTIK products are supplied to qualified research entities in jurisdictions where distribution complies with applicable local regulations. Availability may vary depending on regional import, export, and compliance requirements.

No. All products are supplied strictly for laboratory research and analytical purposes. They are not intended for medical, therapeutic, diagnostic, or clinical use under any circumstances.

Each batch is recorded within an internal documentation and tracking system to ensure traceability across sourcing, verification, and distribution stages. Batch references are maintained for compliance and quality assurance purposes, supporting responsible laboratory use.

Yes. We ship internationally to most regions. Delivery times and customs regulations may vary depending on destination.

View full FAQ

Recommended for you

Customers who purchased Tesamorelin Next-Gen Dual-Chamber Pen also ordered

View full catalogue