TB-500 + BPC-157 Next-Gen Dual-Chamber Pen

Vial

485.00 AED

Shop Peptides
TB-500 + BPC-157 Next-Gen Dual-Chamber Pen

Dosage instructions

5 mg TB-500 + 5 mg BPC-157 per pen5 mg TB-500 + 5 mg BPC-157 per vial

Dose 0.5 mg (each) daily may be increased to 6-8 mg/week

Pens required 6 pens to complete course

Units 5 units daily 0.5 mg (each) per injection

Vials required 6 vials to complete course

Reconstitution 1 ml bacteriostatic water 0.1 ml per injection

Frequency and course duration Daily During 8 weeks (≈2 months). Pause 1 month between cycles and repeat the cycle as needed.

Box content: includes 1 dual-chamber pen (ready-to-use, factory-loaded).

Box content: 1 vial TB-500 5 mg + BPC-157 5 mg + 1 vial Bacteriostatic Water 3ml

Designed for advanced laboratory research environments only

Visuals may show mixed and unmixed pen states to demonstrate our patented dual-chamber technology.

RUO Pen RECOVERY

TB-500 + BPC-157 Next-Gen Dual-Chamber Pen

Tissue repair · Recovery · Gut support · Mobility

Co-developed with 600+ researchers

French Lab Tested 🇫🇷
99%+ Purity Target
HPLC & HRMMS Verified
90,000+ packages delivered worldwide
QR Batch Reports
Secure Checkout
Fast International Shipping (3-5 days)
90,000+ packages delivered worldwide

TB-500 is a peptide fragment derived from Thymosin Beta-4, widely examined in laboratory environments for its interaction with cellular migration pathways and cytoskeletal dynamics.

BPC-157 is a pentadecapeptide widely examined in laboratory environments for its interaction with cellular signaling pathways and tissue-related molecular mechanisms.

This research kit includes one vial of lyophilized TB-500 (5mg) + BPC-157 (5mg) and one vial of bacteriostatic water (3ml) supplied as a laboratory-grade solvent. Both components are provided exclusively for scientific and analytical research applications.

No medical or therapeutic claims are made.

Certificate of Analysis available for every batch.

Secure checkout • Fast UAE dispatch • Research Use Only

Secure checkout

Fast UAE dispatch

TB-500 + BPC-157 Next-Gen Dual-Chamber Pen

About the Product

About TB-500 + BPC-157

TB-500 + BPC-157 is the ultimate tissue repair, recovery and gut-support peptide combination.

This stack is built around two powerful repair pathways: cellular migration, tissue remodeling, inflammation control, vascular signaling, gut integrity and structural recovery.

TB-500 is known for supporting cellular movement, flexibility, tissue remodeling and recovery pathways, while BPC-157 is positioned as one of the most powerful peptides for injury support, gut barrier integrity, tendon repair, ligament recovery, inflammation regulation and digestive function pathways.

Together, they create one of the strongest combinations for repair, recovery, mobility, tissue regeneration, intestinal support, nutrient assimilation and physical resilience protocols.

Key Benefits

Supports tendon and ligament repair pathways
Promotes tissue recovery and structural remodeling
Supports inflammation regulation
Helps accelerate injury recovery protocols
Supports vascular signaling and blood-flow related repair
Promotes cellular migration and tissue regeneration
Supports muscle, joint and connective tissue recovery
Helps optimize mobility and physical resilience
Supports gut barrier integrity and digestive comfort
Supports intestinal repair and gut lining resilience
Helps optimize nutrient assimilation pathways
Supports healthy transit and digestive balance
Ideal for athletes, injury recovery, gut support and high-performance protocols
Powerful stack for full-body repair, digestion and regeneration

Handling & Preparation

Peptik Dual-Chamber Pen Technology is engineered to simplify preparation while helping preserve peak compound quality.

Unlike traditional pre-mixed systems, the peptide and diluent remain separated until preparation — reducing premature exposure and supporting superior stability before use.

The result: faster handling, cleaner preparation and a more premium research experience.

Key Benefits

Twist. Mix. Prepare.
Freshly mixed only when needed
Reduced premature exposure
Designed for peak compound stability
Less handling, more consistency
Next-generation dual-chamber precision

Dual-Chamber Pen Preparation

Attach a sterile pen needle
Securely attach a compatible sterile pen needle before preparation.
Twist to activate mixing
Rotate the dual-chamber mechanism to release the diluent into the peptide chamber.
Allow complete mixing
Let the compound fully dissolve. Gently rotate the pen if needed. Do not shake vigorously.
Select the required measurement
Use the precision dial to select the desired unit setting.
Unit calibration
1 unit = 0.2 mg
This allows controlled and consistent measurement during preparation.
Ready for controlled research use
Once fully mixed and calibrated, the pen is ready for controlled research preparation according to the intended protocol.

For controlled research environments only. Not intended for human, therapeutic, diagnostic, or veterinary use.

Handling & Preparation

Traditional vial preparation for researchers who prefer full control, purity and cost-efficient flexibility.

Peptik Vial Format is designed for clean, controlled preparation using lyophilized peptide and bacteriostatic water. This classic research format offers a simple, precise and cost-efficient approach while maintaining the same purity and compound quality.

The result: maximum control, traditional preparation and better value per vial.

Key Benefits

Classic research preparation
Same purity and compound quality
Cost-efficient by design
Full control over reconstitution
Simple and familiar vial format
Ideal for experienced researchers
Flexible preparation according to protocol

Vial Preparation

Use sterile preparation tools
Use a sterile syringe and appropriate laboratory handling techniques before preparation.
Add bacteriostatic water
Slowly add the required amount of bacteriostatic water along the inner wall of the vial containing the lyophilized peptide.
Allow complete dissolution
Let the peptide dissolve fully. Gently swirl the vial if needed. Do not shake vigorously.
Prepare according to protocol
Once fully dissolved, the solution is ready for controlled research preparation according to the intended protocol.
Store after preparation
Keep the reconstituted vial refrigerated at 2–8°C and use within the recommended post-mixing timeframe.
Protect compound integrity
Keep away from excessive heat, direct sunlight and repeated temperature changes.

For controlled research environments only. Not intended for human, therapeutic, diagnostic, or veterinary use.

Storage Guidelines

To maintain product integrity, proper storage conditions are recommended throughout handling and use.

Unreconstituted (lyophilized) peptide

Store at 2–8°C for short-term use
For extended storage, keep at -20°C or below
Protect from direct light and moisture

Reconstituted solution

Store at 2–8°C and use within a limited timeframe based on laboratory protocols
For longer-term storage, aliquoting and freezing at -20°C is recommended
Avoid repeated freeze-thaw cycles, as this may affect peptide stability

General stability notes

Stability may vary depending on solvent choice and experimental conditions
Use sterile handling techniques to minimize contamination
Always follow internal laboratory guidelines for storage and handling

Use within 5 weeks after mixing.

This product is supplied for research purposes only and should be handled by qualified personnel in appropriate laboratory settings.

Shipping

Worldwide delivery in 3–5 days. Fast, secure, and reliable.

Peptik orders are prepared with secure handling and fast logistics for international customers.

International shipping within 3–5 days
Secure checkout and protected payment
Carefully handled dispatch
Batch documentation available for every order
Delivery timing and customs requirements may vary by destination

Common Questions

Answers to common questions about PEPTIK products, regulatory positioning, and laboratory use.

View full FAQ

What does RUO mean?

RUO stands for "Research Use Only." Products labeled as RUO are intended strictly for laboratory research and analytical applications. They are not approved for human consumption, therapeutic use, diagnostic procedures, or clinical implementation.

Is the product tested for purity?

HPLC Verified ≥99% Purity. Each production batch undergoes High Performance Liquid Chromatography (HPLC) purity testing, mass spectrometry peptide identity verification and full batch traceability documentation. Certificate of Analysis available for every lot.

How should this product be stored?

Store at 2-8°C. Avoid repeated freeze-thaw cycles and exposure to excessive heat or direct light. Use within 5 weeks after mixing.

How is the lyophilized peptide reconstituted?

Using a sterile syringe, add 2 ml of bacteriostatic water slowly along the inner wall of the vial containing the lyophilized peptide. Allow the solution to dissolve completely. Gently swirl the vial if necessary. Avoid vigorous shaking.

Does the pen need reconstitution?

The peptide is supplied in a pre-filled dual-chamber pen as a ready-to-use solution, eliminating the need for reconstitution or additional preparation steps. Protect from contamination during use.

Where does this product ship from?

Ships from UAE warehouse. International delivery typically 3-5 business days. Delivery timing and customs requirements vary by destination.

Is a certificate of analysis available?

Yes. Certificate of Analysis (COA) is available for every batch, documenting HPLC purity testing, mass spectrometry identity verification and full batch traceability. Available upon request to qualified research entities.

How are batches verified?

Every production batch undergoes High Performance Liquid Chromatography (HPLC) purity testing, mass spectrometry peptide identity verification, and is logged with full batch traceability documentation. Quality control is performed in France.

Are these products distributed internationally?

PEPTIK products are supplied to qualified research entities in jurisdictions where distribution complies with applicable local regulations. Availability may vary by region.

Can these products be used for medical purposes?

No. All products are supplied strictly for laboratory research and analytical purposes. They are not intended for medical, therapeutic, diagnostic, or clinical use under any circumstances.

Frequently Asked Questions

Answers to common questions about PEPTIK products, regulatory positioning, and laboratory use.

View full FAQ

RUO stands for “Research Use Only.” Products labeled as RUO are intended strictly for laboratory research and analytical applications. They are not approved for human consumption, therapeutic use, diagnostic procedures, or clinical implementation.

Products are manufactured according to defined quality standards and may be accompanied by relevant analytical documentation where applicable. Testing parameters and specifications depend on the product type and batch. Documentation may be provided to qualified entities upon request.

PEPTIK products are supplied to qualified research entities in jurisdictions where distribution complies with applicable local regulations. Availability may vary depending on regional import, export, and compliance requirements.

No. All products are supplied strictly for laboratory research and analytical purposes. They are not intended for medical, therapeutic, diagnostic, or clinical use under any circumstances.

Each batch is recorded within an internal documentation and tracking system to ensure traceability across sourcing, verification, and distribution stages. Batch references are maintained for compliance and quality assurance purposes, supporting responsible laboratory use.

Yes. We ship internationally to most regions. Delivery times and customs regulations may vary depending on destination.

View full FAQ